We are more than an aluminium alloy solution provider.
Do you need consumer aluminium alloy products or learn more info about aluminum alloy prices?
Aluminum Alloy Hardness Chart. The table below provides typical Vickers hardness values measured with a Tianxing W-20 Vickers hardness tester for nearly 400 different grades of aluminum alloy materials with different heat treatment
Aluminum 6061-T6 is the one of the most common types of aluminum metals used in the industrial world today. With its high strength-to-weight ratio and excellent mability, it
The following tables provide a list of Brinell hardness (HB) values for common aluminum alloys. All values are taken at room temperature (approximay 20°C or
The hardness of 6061-T6 falls within the range of 95 to 97.5 on the Brinell scale. Tensile Strength: This is the resistance of a material to breaking under tension.
Hardness: The hardness of 6061-T6 aluminum is usually tested on the Brinell scale, which shows that it has a moderate amount of hardness. This quality
It has a tensile strength of 45,000 psi (pounds per square inch) and a yield strength of 40,000 psi, making it suitable for structural applications. The T6 aluminum tempering
6061-T6 aluminum is 6061 aluminum in the T6 temper. To achieve this temper, the metal is solution heat-treated and artificially aged until it meets standard
6061-T6 aluminum belongs to the aluminum alloys classification, while AISI 304 stainless steel belongs to the iron alloys. There are 32 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar
6005A - T6 Extrusion. Aluminium alloy 6005A is a medium strength, heat treatable alloy with excellent corrosion resistance. Hardness Brinell: 90 HB: Elongation A: 10 Min % Spec: BS EN 755-2:2008 Rod Bar - 25mm to 50mm Dia. A/F. Mechanical Property Value; Proof Stress: 225 Min
Hardness Brinell: 90 HB: Elongation A: 10 Min % Mechanical Property Value; Spec: BS EN 755-2:2008 Rod Bar - 25mm to 50mm Dia. A/F. Proof Stress: 225 Min MPa: The most common temper for 6005 aluminium is: T6 - Solution heat treated and artificially aged; Supplied Forms. Alloy 6005 is supplied as.
Adding very small amounts of alloying elements to aluminum can increase tensile strength, yield strength and hardness compared to pure aluminum. The most important alloying elements are Si, Mg, Cu, Zn and Mn. These mostly eutectic compounds must be finely dispersed through a hot working process before the alloy can be cold
Untreated alloy in cast-samples showed that hardness increases with increased pouring temperatures, while for samples after heat treatment (T4 and T6), the hardness value decreased with increased
A356.0-T6 aluminum is A356.0 aluminum in the T6 temper. To achieve this temper, the metal is solution heat-treated and artificially aged until it meets standard mechanical property requirements. Brinell Hardness. 80. Elastic (Young\'s, Tensile) Modulus. 70 GPa 10 x psi. Elongation at Break. 6.0 % Fatigue Strength. 90 MPa 13
Efeito das microporosidades nas propriedades de tração, dureza e microestrutural da liga de Alumínio (JIS-AC4C T6) com adição 0,01% de Sr Effect of microporosity on tensile, hardness and
356.0-T6 aluminum is 356.0 aluminum in the T6 temper. To achieve this temper, the metal is solution heat-treated and artificially aged until it meets standard mechanical property requirements. Brinell Hardness. 75. Elastic (Young\'s, Tensile) Modulus. 70 GPa 10 x psi. Elongation at Break. 3.8 % Fatigue Strength. 75 MPa 11
6061 aluminium alloy (Unified Numbering System (UNS) designation A96061) is a precipitation-hardened aluminium alloy, containing magnesium and silicon as its major alloying elements. Originally called \"Alloy 61S\", it was developed in 1935. [2] It has good mechanical properties, exhibits good weldability, and is very commonly extruded